Skip to content

Pro Shaper Sheet Metal LLC

  • Home
  • Metal Shaping Tools
  • Classes
    • 1-Day Observation Class
    • 2-Day Metal-Shaping Class
    • 4-Day Coachbuilding Class
    • 3-Day Finishing Class
    • 130 Hour Metal Shaping Class Offer
    • 240 Hour Class
  • English Wheels
  • T-Shirts
  • Amazon Store
  • Metal Fabrication Videos
  • Premium Videos
  • Services
  • Articles
    • How to remove a dent (Part 1)
    • Sheetmetal shaping with Wray
    • Never-built Virgil Exner concept car rendering takes form 75 years later
    • The Craft of Coachbuilding
    • Demystifying Metal Shaping
    • Our Planishing Hammer Design
    • What is Engineering and What is Art
    • Student Projects
      • A 1937 Riley Sprite and 2 Extended Learning Students
      • 1933 Packard “Macauley Special”
      • Scratch-building a Hotrod
      • Frank Curtis inspired Sports Racer
      • Scratch-Build Gmund Porsche SL
  • Free tool plans and templates
  • Cart
  • Checkout
  • About
  • Contact Us
  • FAQ and Policies
    • Terms and conditions
    • Return Policy
    • Privacy Policy
    • FAQ
Home Posts tagged  sheet metal

Tag: sheet metal

Metal Shaping Refinement of the Porsche 550 Dash

    Good evening it’s Wray from pro shaper workshop in Charlton Massachusetts and we’re back on the Porsche dashboard. I got a time element here. I got to get this done because it belongs to a friend of mine and last week we made … Continue readingMetal Shaping Refinement of the Porsche 550 Dash

Posted on March 4, 2022March 8, 2022by Mark Laporte3 Comments

Metal Shaping a Porsche 550 Dash: Part 1

  Hi, it’s Wray from pro shaper workshop in Charlton Massachusetts, thanks for watching. Wasn’t that a great video hi, it’s ray from pro shaper workshop in Charlton Massachusetts. Look what we got here! This is a 550 poor spider. This is a project that … Continue readingMetal Shaping a Porsche 550 Dash: Part 1

Posted on March 1, 2022March 8, 2022by Mark Laporte2 Comments

Metal Shaping Tips and Tricks: Making a Paper Pattern

    Hi it’s Wray from ProShaper workshop in Charlton, Massachusetts, and today I introduced this in the last video. I told everybody that we’re going to do this back section of the Porsche. We could have done the front one, but we’ve already done … Continue readingMetal Shaping Tips and Tricks: Making a Paper Pattern

Posted on March 8, 2022March 8, 2022by Mark Laporte1 Comment

How to make a Hammer form

How to make a Hammer form Hi, it’s Wray from ProShaper workshop in Charlton Massachusetts, we’re back and we got a little different project. Today we got a pretty sexy little motorcycle gas tank, it’s uh very tear droppy, and the problem was this tank, … Continue readingHow to make a Hammer form

Posted on March 7, 2022March 7, 2022by Mark Laporte1 Comment

Metal Shaping Tools for Beginners

Metal Shaping Tools for Beginners Hi, it’s Wray from ProShaper sheet metal in Charlton Massachusetts. I’M back again, I’m going to do something a little different today, a lot of students that come to my class. They have zero experience, they see stuff on the … Continue readingMetal Shaping Tools for Beginners

Posted on March 7, 2022March 8, 2022by Mark Laporte1 Comment

Shrinking Disc Tips and Tricks

    All right quiet on the set hi, it’s Wray from ProShaper workshop, we’re doing another shrinking disc video. We got the uh, the jaguar uh e-type nose, lower chin panel uh, because these are so low and there’s curbs and everything these get … Continue readingShrinking Disc Tips and Tricks

Posted on March 2, 2022March 8, 2022by Mark Laporte2 Comments

Metal Fabrication Techniques: Tipping Wheel Part 1

    Hi, it’s Wray Schelin from Pro Shaper sheet metal in Charlton Massachusetts and tonight’s video will be on the tipping wheel. I have a couple of them have had different iterations of them. I’ve had this one for probably 15 years, 12 years … Continue readingMetal Fabrication Techniques: Tipping Wheel Part 1

Posted on March 1, 2022March 8, 2022by Mark Laporte2 Comments

Metal Shaping for Beginners: English Wheel Basics

  English Wheel Basics Hi it’s Wray from Pro Shaper in Charlton, Massachusetts. and guess what we’re going to do a different something different tonight. I thought that what I do in this video is do some of the fundamentals of English wheeling there’s a … Continue readingMetal Shaping for Beginners: English Wheel Basics

Posted on March 1, 2022March 8, 2022by Mark Laporte1 Comment
Copyright © 2022 Pro Shaper Sheet Metal LLC. All Rights Reserved. | Fotografie by Catch Themes
Scroll Up
× Ask your questions here!