For our November Coachbuilding / Metal Shaping Class most of my students focused on a hot rod wire form design I had made. [youtube height=”HEIGHT” width=”WIDTH”]https://www.youtube.com/watch?v=RFwZqtm1_Po[/youtube] First day for the hands on portion of my four day coachbuilding class. Two more full days … Continue readingNovember 2017 Class
The June class finished last night it was another awesome opportunity to meet a great group of people that have a passion for learning all they could about the craft of shaping and welding sheet metal into art- car forms, or sculpture. Micah Wolfe-Parsons from … Continue readingJune 2017 Coachbuilding-Metal Shaping Class
Thanks to all that attended my May 19, 20, 21, 21— 2017 coachbuilding class, it was a very special and very productive class. Benjamin Starr and Steve Shepard were at the shop to help out where ever they could, I always appreciate their help. The … Continue readingMay 2017 Metal Shaping – Coachbuilding Class
Thanks to all that attended my May 19, 20, 21, 21— 2017 coachbuilding class, it was a very special and very productive class. Benjamin Starr and Steve Shepard were at the shop to help out where ever they could, I always appreciate their help. The … Continue readingMay 2017 Coachbuilding Class
Finished the second coachbuilding class in May. This class was attended by three guys ( John, Chris and Mike from US Car Tool ( www.uscartool.com) in NC and two guys from ( http://www.gabrielsportscar.com) Gabriel Sports Car in Yonkers, NY ( Frank and Javier. Frank had … Continue readingCOACHBUILDING CLASS 2ND MAY CLASS
My early May coachbuilding class ended yesterday. This class was unusual in that every attendee had ZERO experience in shaping sheet metal, with the exception of Jonathan from FL. His only previous experience was attending my January class. Everybody was very eager to learn and … Continue readingCoachbuilding class May
My April coachbuilding class was a great time. The guys were all motivated to learn as much as possible and they all did outstanding work. Attendees Brian, Jeff, Elton, and Jim all own small English wheels and had a little shaping experience. Bob and Dave … Continue readingCOACHBUILDING CLASS APRIL 2015
My March sheet metal shaping class is at the beginning of day three. Another great bunch of enthusiastic car guys are attending. I had six signed up for the class but Jim from NJ, had to transfer into the April class because of bad driving … Continue readingCOACHBUILDING CLASS MARCH 2015 – PART 1
One more class progress picture of Bruce from NH slapping his reverse curve panel into the correct radius profile on the post dolly. This is the first panel Bruce has ever made, it’s the rear reverse curve section of the side skirt of Scott’s 1934 … Continue readingCOACHBUILDING CLASS MARCH 2015 – PART 2
Some day three pictures from Wray Schelin’s March 2015 coachbuilding class in Stafford Springs, CT. Tim from MO has been shaping a new .060″ 3003 aluminum boot lid skin for Kevin’s Cobra. He has the two panels that make up the boot lid skin all … Continue readingCOACHBUILDING CLASS MARCH 2015 – PART 3